What are the fasteners use to hold the hood to the dash panel. and where can I get some?
My Loboy has bolts and I believe they should be screws
Thanks
CB
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Dash/hood fasteners
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 104
- Joined: Mon Jul 11, 2016 11:13 pm
- Zip Code: 52625
- Tractors Owned: 1949 C, 1953 Super M, 1953 Super H, 1955 Cub LoBoy, 1967 Cub LoBoy, ?? 574
-
- 5+ Years
- Posts: 104
- Joined: Mon Jul 11, 2016 11:13 pm
- Zip Code: 52625
- Tractors Owned: 1949 C, 1953 Super M, 1953 Super H, 1955 Cub LoBoy, 1967 Cub LoBoy, ?? 574
Re: Dash/hood fasteners
Never mind I found em at Steiners
Mike
Mike
- Barnyard
- Team Cub
- Posts: 24266
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: Dash/hood fasteners
You can get them at your local hardware store also.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 4988
- Joined: Fri Oct 29, 2010 11:34 pm
- Zip Code: 36558
- Tractors Owned: Cubs: (3)'49's, (1 is for parts), (1)'57 IH Cub LoBoy w/FH, (2)154 Number Series Loboys, (1 is for parts), '76 Longstripe w/FH, Mowers: C-22, Bush Hog 412, Pennington 59, Woods RM42CF, Woods 42, assorted FCub plows, planters, discs, etc. OTHERS: '49 AC B & Ind. Sickle mower, '61 AC D12 Ser 2, '52 8N, '56 Ferguson 35 Deluxe, '47 & '49 Avery V, '53 MM BG (offset), '51 JD M (regular), '56 JD 420C, with Blade and fire plow, '85 JD 850 (Yanmar) w/72" belly mower, '76? Yanmar 2TR15 1500 & Bush Hog SQ42S-2 mower, '78? FORD Dexta, '86 FORD LGT14D & 48" Mower, (2)Cub Cadets & Mowers (MTD), (4) Sears Surburban's, other MTD mowers, Jeeps & other misc. "treasures"
- Circle of Safety: Y
- Location: AL (Southwest)
Re: Dash/hood fasteners
Barnyard wrote:You can get them at your local hardware store also.
Yep, ask for Truss Head screws, 1/4 x 20 for the dash and grill.
Stan in LA (lower AL)
USAF & Reserves, Reg ARMY, ARMY NG (AL)
USAF & Reserves, Reg ARMY, ARMY NG (AL)
- Dale Finch
- 10+ Years
- Posts: 6677
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Dash/hood fasteners
The hood originally had nuts spot welded to the backside of the screw holes...often they have broken loose, so you may have to tack weld some back on.
-
- 5+ Years
- Posts: 119
- Joined: Thu Dec 03, 2015 6:28 pm
- Zip Code: 99223
- Tractors Owned: 1948 FCub 13747 "Marie"
1948 FCub 16109 "Lizzie"
1948 FCub 44181 "Gussie"
Cub-54A Leveling & Grader Blade
Cub-22 Mower
Cub-193 Moldboard Plow - Circle of Safety: Y
- Location: Spokane Washington
Re: Dash/hood fasteners
Truss Head Screws 8 ea per tractor: 1/4-20 x 1/2" (4ea for Dash support and 4ea for grille)
Round Head Screw with split washer 8ea per tractor: 10-24 x 1/2" (4 ea for each hood dog Leg - there are two dog legs)
Round Head Screw with split washer 8ea per tractor: 10-24 x 1/2" (4 ea for each hood dog Leg - there are two dog legs)
-
- 10+ Years
- Posts: 604
- Joined: Wed Feb 19, 2014 1:09 pm
- Zip Code: 32736
- Tractors Owned: The crew:
"John", 1952 Cub
"Paul", 1951 Cub
"George", 1958 LoBoy Cub with Wagner 45 Loader
"Ringo", 1977 Cub
So far, Paul and Ringo have arrived. John and George were supposed to follow ages ago, but apparently have gone awol. Long story. - Circle of Safety: Y
Re: Dash/hood fasteners
Site sponsor TM Tractor Supply not only has everything you need, but good pictures of what fasteners go where and which ones apply to round hood versus square hood.
-
- Cub Pro
- Posts: 7508
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Re: Dash/hood fasteners
staninlowerAL wrote:Barnyard wrote:You can get them at your local hardware store also.
Yep, ask for Truss Head screws, 1/4 x 20 for the dash and grill.
Here, if you ask for a truss head screw, you get a strange look! Even one of the big industrial suppliers, only has them in Phillips head, But at least you don't get "that look".
Ed
- BIGHOSS
- Cub Pro
- Posts: 1741
- Joined: Tue Jul 18, 2006 9:55 pm
- Zip Code: 37087
- Tractors Owned: 1947 Cub S/N 9216
w/ C-22 Mower
1974 Cub S/N 244814
w/59 Woods Mower
Ford 3000 Gas S/N C375091 w/Bushhog QT2345 Loader & 6' Squealer Bushhog
and a Palomino Mare named GIGI - Circle of Safety: Y
- Location: TN, Lebanon
Re: Dash/hood fasteners
TM Tractor, one of our sponsors, has the correct slotted truss head in SS.
That's where I got mine.
,
That's where I got mine.
,
"Courage is being scared to death-but saddling up anyway".......John Wayne
Who is online
Users browsing this forum: farmallcubkid and 50 guests