Tapping the brain trust here. Is the nut right hand or left hand thread and is there a trick for getting the darned thing off??? need to replace all of the gaskets and seals on that side as it leaks like a sieve
Many thanks as always
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Final drive nut
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 85
- Joined: Tue Aug 31, 2010 10:45 am
- Zip Code: 02878
- Tractors Owned: 1948 Farmall Cub
1953 Farmall Cub - Location: Tiverton, RI
-
- 10+ Years
- Posts: 5184
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Final drive nut
righty tighty, lefty loosey, did you remove the cotter pin 1st?
-
- 10+ Years
- Posts: 85
- Joined: Tue Aug 31, 2010 10:45 am
- Zip Code: 02878
- Tractors Owned: 1948 Farmall Cub
1953 Farmall Cub - Location: Tiverton, RI
Re: Final drive nut
Yes Cotter pin is removed. That was the easy part it just doesn’t want to budge. Any suggestions
-
- 10+ Years
- Posts: 5184
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Final drive nut
heat, impact wrench
Who is online
Users browsing this forum: No registered users and 22 guests