Moldboard plow question

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
fordhead1983
Posts: 24
Joined: Mon Dec 07, 2015 12:09 am
Zip Code: 61061
Tractors Owned: 1957 Cub
Cub-22 Sickle Mower
Cub-172 Planter
Cub-101A Fertilizer Unit
Cub-144 Cultivator
Cub-23A disk
1940 Farmall H
IH #9 8' disk with 2 section IH drag harrow
IH #8 Little Genius 2 bottom 16" plow
McCormick 1 row ground drive corn binder
IH #5 end gate seeder
JI Case VTA running gear
Flareline flare box wagon
John Deere CC-147 8' field cultivator
1952 John Deere 290 Planter w/fertilizer and insecticide
John Deere 214 two row rotary hoe
New Holland 110 10' fertilizer drop spreader
Rosenthal Steel #4 Husker Shredder
Location: Oregon, IL

Moldboard plow question

Postby fordhead1983 » Wed Aug 22, 2018 3:16 pm

Hey gang,
I figured this is more of a "try it and find out" question, but thought I'd ask you guys first and save me some frustration. I am finally getting my 193 moldboard plow ready to install. My RH final drive has the planter/side dresser drive gear installed. Is there enough clearance under the plow depth bracket to go over the gear, or do I have to take the drive gear off?

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
Posts: 23160
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: Moldboard plow question

Postby John *.?-!.* cub owner » Wed Aug 22, 2018 9:14 pm

I have never take a close look at the planter drive gear on one, but I think you will have to take it off. Put the lever on first, it is easier to do when nothing is in the way.
If you are not part of the solution,
you are part of the problem!!!

jsfarmall
501 Club
501 Club
Posts: 587
Joined: Sat Oct 22, 2016 1:04 pm
Zip Code: 72454
Tractors Owned: 1948 Cub "Trusty"
1948 Cub "Rusty"
1948 Cub "Bob"
1948 Cub "Sallie" (wife's tractor)
1965 IH Cub "Annie"
1943 Farmall H
1953 Farmall Super M (granddad's tractor)

Re: Moldboard plow question

Postby jsfarmall » Sat Aug 25, 2018 2:50 pm

It should clear. Mine had a soup can over it from a previous owner and cleared. Was close but cleared.
1948 Cub "Trusty"
1948 Cub "Rusty" mower tractor, trimmed ear dash
1948 Cub "Bob"
1948 Cub "Sallie"
1965 IH Cub "Annie" mower tractor,
1943 Farmall H,
1953 Farmall Super M


  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: Bill V in Md and 6 guests