Prewitt reducer and pto pulley.

[SamsFarm]

That helped. Found it.

It stood out to me because, I picked one up last year.

Someone welded a piece of 3x3 square tube and a piece of 1/8" plate. A makeshift carryall!

I cut off the junk, ground off the welds nice and mounted it to my fasthitch disk.

I had robbed my original one from my disk to use on my CS Bell grain mill!

So I was happy to stumble onto another.

Ps, I did not modify my original in any way, just made it work as is!

[SamsFarm]

Next trivia question

Is there one or two cub trailers in there???

[Jim Becker]

Next trivia question

Is there one or two cub trailers in there???

I only see two. Still waiting for someone to find the Stockland scraper.

[SamsFarm]

Still waiting for someone to find the Stockland scraper.

I think I know where it is!

My guess is the shiny red front wheel weights are in it!

[SamsFarm]

Find the 189 plow release lever!

[Jim Becker]

Yes, the weights are in it.
Which lever, the one on the left or the one at the bottom? Or are they both parts of the same plow?

[SamsFarm]

Which lever, the one on the left or the one at the bottom? Or are they both parts of the same plow?

By the corner of the cub trailer!

[Jim Becker]

Which lever, the one on the left or the one at the bottom? Or are they both parts of the same plow?

By the corner of the cub trailer!

One is near the front corner. The other is more near the tire than the rear corner.