Does the Crank pulley go on all the way until it is against the gear on the end of the crank shaft? I didn't think to look when I removed the pulley.
I just put the pulley back on and it wants to stop when the end of the crank shaft is just flush with the forward end of the pulley hole. If it needs to go until it touches the gear then I have about 3/8" to go.
Thanks
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Pulley position
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 490
- Joined: Wed Nov 23, 2005 2:53 pm
- Location: West Central Ohio
- George Willer
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
- Contact:
You are right... it goes all the way. You cannot get it to go too far.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
Who is online
Users browsing this forum: dgrapes59 and 25 guests