Hey there all!
I was perusing the picture in a previous post below
How does one adjust the wheel width to be so wide with the weights on the INSIDE of the wheel Are there different positions on the axle that the wheel center can bolt to, or is it a matter of only switching the "dish direction" on the center?
I have seen some pics where the wheels look like they are almost going to rub the fenders on the back...
Just wondering!
Thanks for looking!
Mike in La Crosse, WI
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Adjusting Rear Wheel Width
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Hengy
- 10+ Years
- Posts: 7153
- Joined: Sat Feb 18, 2006 8:12 pm
- Zip Code: 15101
- eBay ID: lacrosseorgans
- Skype Name: Mike.Hengelsberg
- Tractors Owned: 1949 Cub "Merlin"
1955 Cub "Lewis"
Cub Trailer
A-60 Blade
Cub-22 Mower
193 Plow - Circle of Safety: Y
- Location: PA, Allison Park (Am Hengelsberg)
- Contact:
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Mike - there is only one position for the wheel center to bolt to the axle but the center can be dished in or out and the rim can then be attached in various configurations.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
- George Willer
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
- Contact:
Mike,
If the wheels were swapped left to right, they would be at the narrowest setting... unless they rubbed the fenders. There are 3 intermediate settings.
If the wheels were swapped left to right, they would be at the narrowest setting... unless they rubbed the fenders. There are 3 intermediate settings.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
Who is online
Users browsing this forum: Gary Dotson and 32 guests