This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

removing drive sprocket from 174 planter

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
troweller
10+ Years
10+ Years
Posts: 46
Joined: Wed Jun 30, 2004 9:09 am
Location: nor cal

removing drive sprocket from 174 planter

Postby troweller » Sun Sep 10, 2006 4:14 pm

i am trying to get the drive sprocket from the 174 planter off the right wheel housing. it is just a 5/8 bolt with a square head, but it is recessed a bit. and is starting to the head is starting to strip. just ran out of pb blaster. the sprocket doe not look to be compatible with 151 plow or 193 plow
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
troweller
10+ Years
10+ Years
Posts: 46
Joined: Wed Jun 30, 2004 9:09 am
Location: nor cal

Postby troweller » Sun Sep 10, 2006 5:58 pm

got the sprocket off, now i need a cover plate
Top
User avatar
Bigdog
Team Cub Mentor
Team Cub Mentor
Posts: 24144
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville
Contact:
Contact Bigdog

Postby Bigdog » Sun Sep 10, 2006 6:00 pm

There is no cover plate used on that side.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com
Top
Post Reply

Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 52 guests