This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Electrolysis Before and After?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Dennis:
Yup George and Donny got you straightened around on that. You know, I didn't include a pic of the charger.. and I should have. That has always been a problem. I should do that. Will try tonight.
It is a simple battery charger. Not one of those automatic ones cause they will shut off immediately. Just an elcheapo from Canadian Tire..
The positive leads go to the re-bar and the negative lead goes to the part being cleaned.. pretty simple. Sometimes it gets confusing if you do not get the circuit memorized. As in all things Cub.. waste not want not is the operative phrase. So when you buy 3 or 4 sets of booster cables.. you always end up with more black than red.. so sometimes you use black leads to the positive... ooops but a lot better than throwing em out. Course, I guess we could paint em.. maybe.......
Thanks for the kind words, I do appreciate. You can see the tank also being made at CubFest Northeast 2006 on the Photo Host. Also, at any CubFest I go to, I am always willing to build 1 or 2 or 12..
Yup George and Donny got you straightened around on that. You know, I didn't include a pic of the charger.. and I should have. That has always been a problem. I should do that. Will try tonight.
It is a simple battery charger. Not one of those automatic ones cause they will shut off immediately. Just an elcheapo from Canadian Tire..
The positive leads go to the re-bar and the negative lead goes to the part being cleaned.. pretty simple. Sometimes it gets confusing if you do not get the circuit memorized. As in all things Cub.. waste not want not is the operative phrase. So when you buy 3 or 4 sets of booster cables.. you always end up with more black than red.. so sometimes you use black leads to the positive... ooops but a lot better than throwing em out. Course, I guess we could paint em.. maybe.......
Thanks for the kind words, I do appreciate. You can see the tank also being made at CubFest Northeast 2006 on the Photo Host. Also, at any CubFest I go to, I am always willing to build 1 or 2 or 12..
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
- Peter Person
- Cub Pro
- Posts: 4559
- Joined: Fri Nov 18, 2005 4:27 pm
- Zip Code: 06076
- Circle of Safety: Y
- Location: CT, Stafford Springs
Rudi,
I only bought two (2) sets of jumper cables and one (1) roll of red tape.
The one oddball black clamp has red tape wrapped around the handles.
Of course I do have one leftover black one. Hmmn.........electrolysis........hair remover..........
Peter
I only bought two (2) sets of jumper cables and one (1) roll of red tape.
The one oddball black clamp has red tape wrapped around the handles.
Of course I do have one leftover black one. Hmmn.........electrolysis........hair remover..........
Peter
1957 Farmall Cub "Emory", Fast-Hitch, L-F194 Plow & Colter, L-38 Disc Harrow, Cub-54A Blade, Cub-22 Sickle Bar Mower, IH 100 Blade
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Peter Person wrote:Rudi,
I only bought two (2) sets of jumper cables and one (1) roll of red tape.
The one oddball black clamp has red tape wrapped around the handles.
Of course I do have one leftover black one. Hmmn.........electrolysis........hair remover..........
Peter
Never thought of the RED TAPE
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
- Mike in NC
- 10+ Years
- Posts: 110
- Joined: Mon Nov 21, 2005 10:09 pm
- Zip Code: 27040
- Tractors Owned: '48 Farmall Cub, '52 John Deere M, '07 John Deere 990, '08 John Deere Gator TX, '12 John Deere 5055D
- Location: North Carolina
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Mike:
If you have a 55 gallon barrel.. fill it 7/8's full.
If you have a 2 lb box of TSP.. PUT IT ALL IN
If you have a 1 lb box.. get another..
If you have a 4 lb box.. put in half
stir gently, let it come to a slow boil... and watch as the rust disappears..
If you have a 55 gallon barrel.. fill it 7/8's full.
If you have a 2 lb box of TSP.. PUT IT ALL IN
If you have a 1 lb box.. get another..
If you have a 4 lb box.. put in half
stir gently, let it come to a slow boil... and watch as the rust disappears..
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Jim Becker wrote:Rudi wrote:It is a simple battery charger. Not one of those automatic ones cause they will shut off immediately.
Would a battery also connected to the charger solve that problem?
Jim:
Yes it would and from what I understand, even a dead battery -- one that won't hold a charge would work as well.. but I have yet to try it or prove it.. Mostly cause I use a cheap charger.. This one currently lists at $39.99 and is not on sale. Mine was on sale for $29.99 I think...
Motomaster Manual Battery Charger, 6/2A
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
- RockClimb
- 10+ Years
- Posts: 42
- Joined: Thu May 17, 2007 8:53 pm
- Location: Wilkes County, North Carolina
Re: Electrolysis Before and After?
Cecil and I came to the same conclusion based on a few years experience. Using TSP you just have to clean the parts and let them dry after a trip in the tank. You can then hang em up and forget about them until it is time to prime ALL of the parts for that particular project. They will NOT RUST. I cannot explain it.. it just IS..
I have been using washing soda for about 2 years now. I just finished converting my tank over to TSP a couple of hours ago. I am a HAPPY convert to TSP now For others wondering if TSP is worth the added cost, YES IT IS. I am seeing about twice the reaction that I saw when I used washing soda. I have the steering arms off my Cub in the tank now and can already see a change, I am hoping that they will free up so I don't have to take a torch to them.
EDIT: After 2 days in the tank the first steering arm started to free up, but it will be winter before I can continue as I need the tractor to mow.
Last edited by RockClimb on Thu May 31, 2007 10:24 pm, edited 2 times in total.
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
- RockClimb
- 10+ Years
- Posts: 42
- Joined: Thu May 17, 2007 8:53 pm
- Location: Wilkes County, North Carolina
- lucky1
- 10+ Years
- Posts: 21
- Joined: Thu Aug 15, 2013 11:05 am
- Zip Code: 46737
- Circle of Safety: Y
Re: Electrolysis Before and After?
Yes...what about non ferrous metals? Will they clean up too?
- Rudi
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
- Contact:
Re: Electrolysis Before and After?
lucky1:
Do not put copper, aluminum or brass in the tank. They could be damaged. Electrolysis is best suited to steel and cast iron.
Do not put copper, aluminum or brass in the tank. They could be damaged. Electrolysis is best suited to steel and cast iron.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 3328
- Joined: Fri Jan 11, 2008 5:30 pm
- Zip Code: 02747
- Tractors Owned: .
1948 F Cub Fast hitch
1949 F Cub
1950 F Cub Fast hitch
1965 Loboy Fast hitch
1966 Loboy with 1000 loader
1976 International Cub
several walk behind garden tractors
(20) FastHitch implements
tons' of cultivating and planting stuff
C-16 Cub Middlebuster
(2) A33 Cub bean harvester
NOS Planet Jr. planter
172 planter, large combo hopper, 101A fertilzer hopper
Cole 250# fertilizer hopper with chain drive. - Location: MA, Dartmouth
Re: Electrolysis Before and After?
Use an ultrasonic cleaning machine for small non ferous stuff, I have one I use for antique brass hardware, aluminum castings might be better off by soda blasting. Your call
-
- 10+ Years
- Posts: 1172
- Joined: Tue Oct 19, 2004 7:10 am
- Zip Code: 29130
- Tractors Owned: fcub(5)
tricycle cub
154 (4)
Earthmaster (2)
JD 40T, JD 420 crawler-loader, JD MT
JD Unstyled A, Styled A, Unstyled AR
JD H
Centaur Tractor
AC Model C, G
Cub Cadets (9)
Gibson D
Red-E - Circle of Safety: Y
- Location: SC, Ridgeway
Re: Electrolysis Before and After?
Electrolysis will remove the oxides from all the common metals, need to be careful on the selection of an electrolyte. I have cleaned brass, silver, aluminum but mostly was not worth the effort.
Who is online
Users browsing this forum: rjohnson and 38 guests