I keep wishing I could find a tip each week, but unfortunately I do not see them all and am depending on other members for tips to the tips
This week it seems we got two of them, so many thanks to BigDog
for pointing this one out
Rudi wrote: Rudi wrote:
This weeks "Cub Tip of the Week"
is courtesy of: : How To Remove a Stuck Oil Pressure Relief Valve
Got the valve out. Thanks Eugene for the tip. Here is how I got it out. I used a 7/16 dowel and cut a notch in the end and made a wedge to swell the end when it hit the bottom of the valve. The spring free length is real close. Haven't figured how to get the 9 1/2 lbs for the spring test length. I'll change the oil and filter and see how the pressure is. Thanks for all the help.
Ron in Mid Missouri