Hi All,
The inlet on my carb, where the fuel line threads in is just a little messed up and I want to get a bottoming tap and chase the threads. Could someone please give me the thread size. Thanks !!!
Paul K. in N.H.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Carb Threads
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 694
- Joined: Tue Feb 04, 2003 6:17 am
- Location: NH, Ossipee
- George Willer
- Cub Pro
- Posts: 7013
- Joined: Sun Feb 02, 2003 9:36 pm
- Zip Code: 43420
- Circle of Safety: Y
- Location: OHIO, Fremont
- Contact:
Re: Carb Threads
PAUL K. in N.H. wrote:Hi All,
The inlet on my carb, where the fuel line threads in is just a little messed up and I want to get a bottoming tap and chase the threads. Could someone please give me the thread size. Thanks !!!
Paul K. in N.H.
1/2-20. If it's messed up because someone mistakenly used a 1/4 pipe fitting in it you'll have to use a helicoil.
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
-
- 10+ Years
- Posts: 694
- Joined: Tue Feb 04, 2003 6:17 am
- Location: NH, Ossipee
Who is online
Users browsing this forum: No registered users and 50 guests