I've come up with a design for making the L-54 into a Meyers-style power angle plow. I'll try to get a quote together on the parts tomorrow & see how much this will cost me. I should have it all worked out by next Monday at the latest.
While investigating whether I could put a bypass block on my tractor, I find that the exhaust pipe goes right in front of the plate on the Touch Control where it would mount.
So that's out unless I re-bend the exhaust pipe to gain a little clearance.
I also notice that there is a 1/8" NPT plug in both inlet and outlet on this mounting plate.
So my next question: Why can't I just remove the plugs, and install hydraulic lines directly into the block?
(I will still need to do something different with the exhaust either way)
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
65 Lo-Boy Hydraulics
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
Who is online
Users browsing this forum: No registered users and 35 guests