Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Fri Dec 26, 2003 8:07 pm
Jim, I don't know how to get this on the forum, but I think you do. This came with the tractor when I got it, but I don't think it belongs. Do you know what it's for? Elmer
Fri Dec 26, 2003 8:09 pm
Home made with 3 blades off some scrape on 2 plow beams with rear cultivator spring rods to lift it. I don't see how he hitched it up.
Fri Dec 26, 2003 10:17 pm
Jim, I think you nailed it. If you look closely, it appears as if the blade is actually made up of three cutting edges off a larger snow plow.
Sat Dec 27, 2003 12:34 am
Probably bolted plow beams to wheel housings. For another use for plow beams , check harrow on my site. Dan
Sat Dec 27, 2003 11:16 am
Jim, I belive your'e right about the blade. I've had it for years but I never got around to really looking at it or trying to hook it up . When it warms up a little i'll try that. In the mean time i'll measure the plowshare width & see if I can figure where it would hook on the tractor. I also have 2 discs & other stuff i'll send pictures of.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.