Throw-out bearing Success!

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Throw-out bearing Success!

Postby EZ » Mon Dec 29, 2003 11:09 am

It was raining up in in Northern Ontario yesterday, thus we had no kids over to skate on the outdoor rink. Hey, with the shop free I decided to get into the '67 Loboy, Frank.
The tractor split was successful. I had to change out the throw-out bearing as the graphite block was busted up. Well, what to my amazement was in the clutch housing but 2 of the 3 locking nuts for the clutch finger adjustment. Not sure why or how, but maybe before it was finally put away 20 years ago someone had attempted to adjust the clutch, or, they were not tightened down and fell off? Maybe it was the missing 3rd. one that busted the graphite block? Anyway, that was last night. This morning, after a double check that all was tight, all cotter pins in, etc......I joined Frank back together. Looks like I'll have to do some adjusting for the fresh TOB, but I should be able to try and take it for a spin later on today. The whole job takes 3 to 4 hours for a novice. :D
Just Do It !
User avatar
EZ
10+ Years
10+ Years
 
Posts: 937
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario

Return to Farmall Cub

Who is online

Users browsing this forum: Winfield Dave and 4 guests