There are two different lengths of the 5/8" implement mounting bolts. The smart man down at the tractor store warned me to be careful when using the long ones as I could crack the casting. I was wondering what was the purpose of the long bolts. Is it for an easier fit when used with the "U" shaped hole on the mounting bracket ?( instead of the other "O" shaped hole) .
thanks
Stanley
implement mounting bolts
Moderator: Team Cub
3 posts
• Page 1 of 1
implement mounting bolts
by farmer.boy » Tue Dec 30, 2003 10:41 am
- farmer.boy
- Cub Star
- Posts: 66
- Joined: Tue Apr 29, 2003 10:18 am
- Location: Al, Huntsville
by Bigdog » Tue Dec 30, 2003 3:10 pm
Some of the implements have heavier (thicker) steel where it attaches to the tractor.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
Bigdog - Team Cub
- Posts: 23786
- Joined: Sun Feb 02, 2003 12:50 pm
- Location: OH, Stoutsville
- Zip Code: 43154
- Circle of Safety: Y
by Jack Donovan » Tue Dec 30, 2003 5:46 pm
Som Implements bolt over your draw bar making it thicker, Its mainly on the rear axcel housings where the biggest concern is. Most of the others have the hole all the way through the castings.
- Jack Donovan
- 501 Club
- Posts: 874
- Joined: Sun Feb 02, 2003 11:19 pm
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: Bill Hudson, Papa's Cub, RUSSALL, shyntempt, VaJohn and 6 guests
|
|