Have an IH C-2 mower for sale that is currently on my '50 cub.
- Deck is solid. Entire unit (less spindle) was sandblasted, primed with IH red oxide primer and painted with IH 2150 to match tractor.
- Mower skirts are complete and have been straightened at machine shop.
- Mounting angle brackets were straightened at machine shop. New pressed-in pivot bushings installed.
- Belt and blades are 1 season old. Used only in pasture.
- Spindle (Danuser) has no play and appears to be in good shape.
- New over-running clutch pin springs.
- PTO pulley, pulley hub, lift arm and chain included.
- Side skids were fabricated in machine shop because I didn't know that you could still buy them.
Selling because I have more mowers than I can use. Will get more use out of my Cub with 3-point hitch than with mower.
Selling price: $400.00 - you pick up.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
C-2 Mower For Sale
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 74
- Joined: Wed Apr 02, 2003 10:40 am
- Location: NC, Autryville
C-2 Mower For Sale
My worst day on a Cub is better than my best day at the office!
Who is online
Users browsing this forum: No registered users and 24 guests