Hi Folks,
Enjoying this forum, I have been lurking for a few months.
I have a '49 I bought (came with a house) in '82, and I have been fixing
and using it since, for snow plowing, belly mower and hauling a trailer.
It's a lot of fun to use and work on.
I recently bought a crank from the fellow on ebay who is making new
ones. I have never crank started this or any other engine bigger than a
sandwich engine. Can you give me a short lesson or point me to the
right on-line link?
AmLaFrance19
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Lesson on Cranking?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 7
- Joined: Tue Dec 09, 2003 1:53 pm
- Location: MA, Acton
- Contact:
Lesson on Cranking?
- 49 Cub
-
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Go to Rudi's manual server (pointer on all of his posts) and look at a Cub Owner's Manual. It is explained there. Pay attention to how to hold the crank. Make sure your timing is set by the book.
Then go to http://www.binderbooks.com/ and buy a repro Owner's Manual.
Then go to http://www.binderbooks.com/ and buy a repro Owner's Manual.
Who is online
Users browsing this forum: muleboss and 23 guests