Since I do not have the tractor yet, it is not possible for me to see if it would work or not.
Hopefully you can follow my train of thought here. I know a picture would make it easier but...
Guy
Dozer blade lift bracket
Moderator: Team Cub
2 posts
• Page 1 of 1
Dozer blade lift bracket
by Shopp'n Cubs » Fri Jan 23, 2004 8:27 pm
On all the photos I've seen the bracket that attaches to the lift is a curved piece. The one that I bought did not have that but has a straight piece with three holes in it. The owner said that some had the curved and some straight.
Since I do not have the tractor yet, it is not possible for me to see if it would work or not.
Hopefully you can follow my train of thought here. I know a picture would make it easier but...
Guy
Since I do not have the tractor yet, it is not possible for me to see if it would work or not.
Hopefully you can follow my train of thought here. I know a picture would make it easier but...
Guy
'55 Cub, (but always shopp'n!) '02 Kub, '57 Ford 640
- Shopp'n Cubs
- Cub Star
- Posts: 195
- Joined: Fri Nov 14, 2003 12:45 pm
- Location: Minnesota
by Jim Becker » Fri Jan 23, 2004 8:36 pm
Pictures of most of the blade variants are on the TM Tractor Parts web page. Follow the pointers on the implement picture page in the photo gallery.
http://www.tm-tractor.com/gim/gim_001.htm
http://www.tm-tractor.com/gim/gim_001.htm
-
Jim Becker - Team Cub
- Posts: 11310
- Joined: Sun Feb 02, 2003 3:14 pm
- Location: TX
- Zip Code: 75048
- Circle of Safety: Y
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 7 guests
|
|