This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Steering arm shims

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
Slappy
10+ Years
10+ Years
Posts: 108
Joined: Tue Nov 04, 2003 7:49 am
Location: Milton, Florida

Steering arm shims

Postby Slappy » Tue Jan 27, 2004 7:14 am

While working on the front end I found that the steering arm had no shims between the arm and the bottom plate. I ordered shims but I'm not sure how much up and down play in the tie rod end is appropriate. Does anyone have any ideas here? Or perhaps someone can tell me the approximate shim thickness on their Cub to give me some idea. Thanks in advance.
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
Jim Becker
Team Cub
Team Cub
Posts: 17272
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Postby Jim Becker » Tue Jan 27, 2004 8:21 am

You don't really want any. If the steering isn't binding, you are OK as is.
Top
Post Reply

Return to “Farmall Cub”

Who is online

Users browsing this forum: Cubfriend and 59 guests