This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Steering arm shims
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 108
- Joined: Tue Nov 04, 2003 7:49 am
- Location: Milton, Florida
Steering arm shims
While working on the front end I found that the steering arm had no shims between the arm and the bottom plate. I ordered shims but I'm not sure how much up and down play in the tie rod end is appropriate. Does anyone have any ideas here? Or perhaps someone can tell me the approximate shim thickness on their Cub to give me some idea. Thanks in advance.
-
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Who is online
Users browsing this forum: No registered users and 45 guests