Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Fri Jan 30, 2004 7:09 pm
Is it just me, or is something not right about this cub. It almost looks as if it is made up from parts from different models.
Fri Jan 30, 2004 7:27 pm
I am still no expert, but my eyes tell me the same thing. By any chance could the right rear final have been changed and they used a lefty? Would account for the added clearance between the fender and wheel? If so then they are well on the way to make a 2 seater
The fact that the centers are dished in doesn't account for all of the extra space does it?
Of course the draw bar is not actually stock is it
Fri Jan 30, 2004 7:54 pm
I think that by turning the dish out, and by setting the wheel out on the brackets you could get that much room, but I was looking more at the grill and hood, they didn't seem to be quite a match.
Fri Jan 30, 2004 8:34 pm
It also has a McCormick Farmall Cub emblem which I don't think is right. But it looks to be in pretty good shape and has real potential!!
Fri Jan 30, 2004 9:20 pm
It all looks normal enough to me.
Fri Jan 30, 2004 9:41 pm
After much work on the hood and dogleg panel on my 74, I'd say it's a cub. I believe the wheels have been reversed and front axels are out a little. I do see a balast resistor, so they're fighting that 6v/ 12v battle. Just a guess, but with the wheels out, they may have been mowing a hill side.
Fri Jan 30, 2004 11:11 pm
It looks OK to me also. the correct Police could make a long list but not any longer than most of the Cubs out there.
Fri Jan 30, 2004 11:36 pm
I guess it was just the way I was looking at it. Regarding the correct police, I think the 48 I've had for several years is noe on their most wanted list.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.