Farmall Cub

Hi All,
I was having a problem with my hyd's not having alot of up pressure and having no down pressure(just bleeds down).
I deceided to overhaul the system. I bought the kit and began yesterday morning. All in all not too bad of a job.

The surprise came when I discovered the parts that are missing.
I'm missing :1.oil strainer 2. safety valve sleeve, 3. safety valve spring.

I plan on ordering the missing parts and hope this is the cause of my hyd problems.

Sometimes it like a good mystery novel taking these old tractors apart.


Ron

That is a job I will have to tackle in the future so I am anxious to hear how yours turns out when finished. Keep us posted when finished.

I did one aobut a year ago, and the big thing is to make sure everything is clean (including the housing), and lube all the o'rings with Hytran when assembling. Sure can make a difference in how they work.