I hope someone can help me with a problem. I just purchased this blade and am needing the bracket that bolts to the torgue tube of the tractor just behind the starter. This is not a 54A blade, but the one that came just before the 54A. I have the arms that extend down from this bracket to where the blade mounts. If someone can give me the dimensions and the bolt hole center dimensions I think I can make the bracket. Appears to be just flat stock 8 to 10 inches long. The bracket appears in the photo courtsey of TM tractors.
Thanks for any help.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Need help with a bracket for #54 snow blade
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Dan Robertson
- 10+ Years
- Posts: 311
- Joined: Thu Feb 06, 2003 4:08 pm
- Zip Code: 47421
- eBay ID: gotowin
- Tractors Owned: 55 cub,
74 cub,
Cub Cadet 1515,
Case 580B TLB,
53 Ford Jubilee,
MF 271XE,
JD 3130,
JD gater - Location: Bedford, IN
Need help with a bracket for #54 snow blade
Dan Robertson
We all make mistakes
I try to keep mine to a minimum
We all make mistakes
I try to keep mine to a minimum
-
- 10+ Years
- Posts: 206
- Joined: Sat Mar 08, 2003 5:41 pm
- Zip Code: 61469
- Tractors Owned: Cub 1949, 1963
Cadets 2 Originals, 100,108
3 100 manure spreaders. One is fully restored. - Location: Illinois, Oquawka
- Dan Robertson
- 10+ Years
- Posts: 311
- Joined: Thu Feb 06, 2003 4:08 pm
- Zip Code: 47421
- eBay ID: gotowin
- Tractors Owned: 55 cub,
74 cub,
Cub Cadet 1515,
Case 580B TLB,
53 Ford Jubilee,
MF 271XE,
JD 3130,
JD gater - Location: Bedford, IN
Thanks to Donny, and everyone else that responded I now have a bracket fabricated and the #54 blade installed on the tractor in addition to the center mount blade that was already installed. I think they will/should work together pretty well. The snow accumulation that we have had on the ground for the past month has just about all melted right now though.
Dan Robertson
We all make mistakes
I try to keep mine to a minimum
We all make mistakes
I try to keep mine to a minimum
Who is online
Users browsing this forum: No registered users and 58 guests