Ring set?
Moderator: Team Cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
5 posts
• Page 1 of 1
by Bigdog » Thu Feb 19, 2004 10:15 am
Check my reply to your other post.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
Bigdog - Team Cub
- Posts: 23820
- Joined: Sun Feb 02, 2003 12:50 pm
- Location: OH, Stoutsville
- Zip Code: 43154
- Circle of Safety: Y
Re: Ring set?
by George Willer » Thu Feb 19, 2004 11:21 am
BOB K. wrote:I am looking for a new piston ring set. Does anyone know if NAPA Auto carrys them and what the part # would be. Also what part# a gasket set is. Thanks For the help.
Bob,
Give Joe Rice a call at Joe's Farmalls. (814) 226-6214
He'll sell you a good set of rings for half what NAPA gets. I just did two engines using his rings and gaskets.
http://members.tripod.com/~joesfarmallparts/index.html
George Willer
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
http://gwill.net
The most affectionate creature in the world is a wet dog. Ambrose Bierce
-
George Willer - Cub Pro
- Posts: 7011
- Joined: Sun Feb 02, 2003 9:36 pm
- Location: OHIO, Fremont
- Zip Code: 43420
- Circle of Safety: Y
by artc » Thu Feb 19, 2004 1:47 pm
i used two different sets of gaskets. both, i think were in the $6X.00 range.
the Federal Mogul set was not as complete and was missing things like touch control pump gaskets. The Victor Reinz set #FS1879X (from NAPA) did (both ends!).
NAPA did carry ring sets, but i don't remember what i paid.
I took a look at Joe's Farmall, from Georges post. Looks like he's got a pretty good selection of commonly needed parts. i'm going to give him a try on a carb kit, muffler, and decals.
the Federal Mogul set was not as complete and was missing things like touch control pump gaskets. The Victor Reinz set #FS1879X (from NAPA) did (both ends!).
NAPA did carry ring sets, but i don't remember what i paid.
I took a look at Joe's Farmall, from Georges post. Looks like he's got a pretty good selection of commonly needed parts. i'm going to give him a try on a carb kit, muffler, and decals.
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
http://www.ZagrayFarmMuseum.org
-
artc - Cub Pro
- Posts: 1747
- Joined: Sun Mar 30, 2003 10:25 am
- Location: CT, Middletown
- Zip Code: 06457
- eBay ID: cmtelephone
- Tractors Owned: 1950 cubs (3), 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial.1948 super AI (trailer queen), 1958 450.
by Rudi » Thu Feb 19, 2004 1:57 pm
Art:
Stick to CaseIH for the carb kit! See posts under Carb Kits!
Yust me humble opinion.
Stick to CaseIH for the carb kit! See posts under Carb Kits!
Yust me humble opinion.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
Rudi - Team Cub
- Posts: 28467
- Joined: Sun Feb 02, 2003 8:37 pm
- Location: NB Dieppe, Canada
- Zip Code: E1A7J3
- eBay ID: ve9rhs
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: Buzzard Wing, Radec Aksarben, Trent M and 7 guests
|
|