Page 1 of 1
Ring set?
Posted: Thu Feb 19, 2004 9:54 am
by BOB K.
I am looking for a new piston ring set. Does anyone know if NAPA Auto carrys them and what the part # would be. Also what part# a gasket set is. Thanks For the help.
Posted: Thu Feb 19, 2004 10:15 am
by Bigdog
Check my reply to your other post.
Re: Ring set?
Posted: Thu Feb 19, 2004 11:21 am
by George Willer
BOB K. wrote:I am looking for a new piston ring set. Does anyone know if NAPA Auto carrys them and what the part # would be. Also what part# a gasket set is. Thanks For the help.
Bob,
Give Joe Rice a call at Joe's Farmalls. (814) 226-6214
He'll sell you a good set of rings for half what NAPA gets. I just did two engines using his rings and gaskets.
http://members.tripod.com/~joesfarmallparts/index.html
Posted: Thu Feb 19, 2004 1:47 pm
by artc
i used two different sets of gaskets. both, i think were in the $6X.00 range.
the Federal Mogul set was not as complete and was missing things like touch control pump gaskets. The Victor Reinz set #FS1879X (from NAPA) did (both ends!).
NAPA did carry ring sets, but i don't remember what i paid.
I took a look at Joe's Farmall, from Georges post. Looks like he's got a pretty good selection of commonly needed parts. i'm going to give him a try on a carb kit, muffler, and decals.
Posted: Thu Feb 19, 2004 1:57 pm
by Rudi
Art:
Stick to CaseIH for the carb kit! See posts under Carb Kits!
Yust me humble opinion.