PTO adapter

Fri Feb 20, 2004 1:37 pm

Does anyone know if you can buy an adapter for the PTO shaft that would change the number of splines from 11 to a standard 6 spline? I was interested in using newer equipment with my '49 cub and I can find anything with an 11 spline hook-up.

Thanks,
-Eric

Fri Feb 20, 2004 2:23 pm

Eric,

If you could find such an adapter, what would you run with it? It would have to be something that could run backward and at 3X the standard speed. You just missed such an adapter on eBay that sold for more than $808. I wasn't considering selling mine, but at that price, I may.

Fri Feb 20, 2004 3:47 pm

If you are just looking to change the spline to a 6 spline,your local IH dealer should have an adapter in stock I just bought one for $28.00 plus tax. The ones from the dealer are machined steel were as some cheeper types are pressed metal and sell for about $12.00. I looked at both,and felt that the machined was a lot better peice(stronger and better fit). I no longer need the one that I bought and would sell it for $20.00 plus shipping . Russ

Sat Feb 21, 2004 8:08 am

Eric,

This is the adapter George is talking about. It will change the direction and shaft size.

http://cgi.ebay.com/ws/eBayISAPI.dll?MfcISAPICommand=ViewItem&item=2597931898

Sat Feb 21, 2004 9:58 am

Larry,

This is the one I was talking about. The driven gear is 3 times as large as the driving one to really convert the RPM. I don't see how those that are the same size on both sides can do it... unless the driving gear is very small.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2595040187&category=56175&sspagename=STRK%3AMEBWA%3AIT&rd=1

As I said in another post, it's like the unit I have on Scruffy.

Image

Sat Feb 21, 2004 11:00 am

Wow, :shock: two totally different units. Do both accomplish the same thing or, is one better than the other. Looks like the bigger would be better :?: :roll: