New cub for me!!!

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

New cub for me!!!

Postby Maritimer » Fri Feb 27, 2004 9:29 pm

BOY oh boy oh boy oh boy oh boy oh boy oh boy oh boy oh boy!!!! I just went to a gentlemans house an hour ago to get his copy of an owners manual for his 52 cub. He said i could photo copy it. He had his cub in the shop with the bottom half of the motor apart. He had all the items with it. hillers, cultivators, mower, snow blade as well as the grader blade and the ground plow. this man said he will never use it again. and said if I wanted it I could have it for$100 :o . I said SOLD Decals are still on it, all paint is very nice. I don't even have to paint it. Original reciet of sale is there also. $800.22. I will pick it up tomorrow. He said the bearings had turned so he wanted to replace them. My best deal I have ever got!!!!

This is the only stroke of good luck I have EVER EVER EVER recieved!!!

I am so excited!! :D :D :D
My dad once told me if it wasn't for bad luck......I wouldn't have any luck at all......
Maritimer
10+ Years
10+ Years
 
Posts: 145
Joined: Mon Feb 02, 2004 7:05 pm
Location: Brookfield Nova Scotia

Postby Bigdog » Fri Feb 27, 2004 9:32 pm

Congratulations! I gotta start gettin' around north of the border! I'm missin' all the good buys! :D
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

http://www.cubtug.com
User avatar
Bigdog
Team Cub
Team Cub
 
Posts: 23820
Joined: Sun Feb 02, 2003 12:50 pm
Location: OH, Stoutsville
Zip Code: 43154
Circle of Safety Award
Circle of Safety: Y

Postby Jim Hudson » Fri Feb 27, 2004 9:33 pm

Thats a good deal and a good deal more
Young man for work, old man for advice
User avatar
Jim Hudson
10+ Years
10+ Years
 
Posts: 1223
Joined: Sun Feb 02, 2003 1:11 pm
Location: Albemarle, North Carolina 28001
Zip Code: 28001

Postby Ron L » Fri Feb 27, 2004 10:30 pm

SEE WHAT HAPPENS when you joined this board !!! Congratulations. OR, were you just dreaming..... Sounds like a dream to me.

BTW: I think you should change your signature "saying".
Last edited by Ron L on Fri Feb 27, 2004 10:34 pm, edited 1 time in total.
Ron
Ron L
10+ Years
10+ Years
 
Posts: 661
Joined: Wed Mar 05, 2003 9:09 pm
Location: PA, Berwick
Zip Code: 18603
Tractors Owned: 1948 Cub
1955 Cub

Postby Donny M » Fri Feb 27, 2004 10:33 pm

Congratulations on a great deal :!: :!: :!: :D :D :D

Hope you don't have to trudge through too much snow to pick it up. :lol:

Bigdog needs to get a passport. :lol: :lol: :lol:
Donny M
5+ Years
5+ Years
 

Postby Jeff M » Sat Feb 28, 2004 6:38 am

A hundred bucks--WOW! I just hope you can still sleep at night after that! Seriously, the Cub obviously is going to someone who will appreciate it, and I'm sure the old guy could see that, too. BD, you can't get 'em all! :D

Congratulations!
Care and feeding of family's Ford 641 ('61)
Kubota BX 1860
User avatar
Jeff M
10+ Years
10+ Years
 
Posts: 938
Joined: Sun Aug 24, 2003 6:00 am
Location: ME Raymond
Zip Code: 04071
Tractors Owned: Cubless, but living vicariously through others
'61 Ford 641
Kubota BX 1860

Postby johnbron » Sat Feb 28, 2004 9:24 am

:P And I thought I got a great deal paying $500 for my 48, Now I am beginning to think I got snookered by a slick farmer. :x
Then came Bronson
User avatar
johnbron
CubPro Emeritus
 
Posts: 2809
Joined: Sun Feb 02, 2003 2:31 am
Location: Puyallup, WA.

Postby artc » Sat Feb 28, 2004 12:28 pm

awesome :!: Ron L is right, though. time to change that tag line :!:

congrats, good things happen to good people.
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
User avatar
artc
Cub Pro
Cub Pro
 
Posts: 1749
Joined: Sun Mar 30, 2003 10:25 am
Location: CT, Middletown
Zip Code: 06457
eBay ID: cmtelephone
Tractors Owned: 1950 cubs (3), 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial.1948 super AI (trailer queen), 1958 450.

Postby Maritimer » Sat Feb 28, 2004 4:40 pm

Just got back with the cub, I got the cultivators, mower, hillers, plow(ground) but not the discs. I have not got a set of discs but he said someone else wanted those, I did not push it. I'm still very very very happy :D :D . It still had the original coil and generator in it!! Oh, and a wood saw? It is a factory item. It runs off the belt pto and hooks up to the rear draw bar its pretty neat anyhow. Does anyone know where I can get a book on how to hook the cultivators up? Or by any chance know of a set of discs? :wink:
My dad once told me if it wasn't for bad luck......I wouldn't have any luck at all......
Maritimer
10+ Years
10+ Years
 
Posts: 145
Joined: Mon Feb 02, 2004 7:05 pm
Location: Brookfield Nova Scotia

Postby Ron L » Sat Feb 28, 2004 6:36 pm

Maritimer wrote: Does anyone know where I can get a book on how to hook the cultivators up?:wink:


Look in Rudi's "Cub Manual" section. I know the "Cub-144 Cultivator" owner's manual is there with set up instructions........
Ron
Ron L
10+ Years
10+ Years
 
Posts: 661
Joined: Wed Mar 05, 2003 9:09 pm
Location: PA, Berwick
Zip Code: 18603
Tractors Owned: 1948 Cub
1955 Cub

new cub for you

Postby Bruce Sanford » Sat Feb 28, 2004 8:36 pm

Well you are a very lucky man .After some of the snow goes I would like to come up and see this machine. Let me know I am under the Elmsdale tele exchange
Bruce Sanford
5+ Years
5+ Years
 

Postby Rudi » Sun Feb 29, 2004 2:53 pm

Maritimer:

Congratulations! Man what a deal :!:

Beats the pants off of what I paid for Jethro - I paid $100.00 and got a major TLC candidate and 2 brand new rear tires! Your deal is still miles ahead! Way to go.

Thank the Lord for your blessings!

Now you have something to show off at the CubFest!!!! BTW are you coming??? 11-12 and 13 June. Calendar to follow in the next week I hope.

Check the manual server for the setting up instructions for the Cultivator - seeing as you got it here, 95% chance it is the Cub-144 - manual is there!
Last edited by Rudi on Mon Mar 01, 2004 7:50 pm, edited 1 time in total.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
Rudi
Team Cub
Team Cub
 
Posts: 28468
Joined: Sun Feb 02, 2003 8:37 pm
Location: NB Dieppe, Canada
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC
Circle of Safety Award
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM

Postby Brent » Mon Mar 01, 2004 9:58 am

Maritimer,

TM Tractor parts has some good pictures in their gallery on how to hook up the cultivators and other implements. Their on this board under Links.
Always try the easiest thing first.
User avatar
Brent
10+ Years
10+ Years
 
Posts: 1046
Joined: Thu Feb 06, 2003 9:21 am
Location: Acton Ca.
Zip Code: 93510

Postby parts man » Mon Mar 01, 2004 7:35 pm

Maritimer, GOOD DEAL!!!!! Congratulations!! It's nice to see someone who'll put the tractor to good use get it!! BTW, it is easily worth 10x that amount!!! RIGHT-ON!!!!!
V.P. of T.S.A. (taking stuff apart)
User avatar
parts man
10+ Years
10+ Years
 
Posts: 619
Joined: Wed Jul 30, 2003 9:41 pm
Location: Sussex N.B. Can.


Return to Farmall Cub

Who is online

Users browsing this forum: ad356, Dale Finch, Glen, RUSSALL, sford, Spuds Buddy and 6 guests