Need measurement from lo-boy

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Need measurement from lo-boy

Postby Daniel H. » Mon Mar 01, 2004 10:07 pm

I'm still playing with adapting the Allis-Chamlers gear box to the cub to slow down and reverse the PTO but I need to know the distance from the center of the PTO shaft to the inside of the left (viewed from rear) fender to see if I have enough clearence. Since my cub is in pieces I can't measure it. Thanks!
The four most expensive words in tractor restoration: "We might as well..."
Daniel H.
10+ Years
10+ Years
Posts: 552
Joined: Mon Feb 03, 2003 1:18 pm
Location: NC, Yadkinville

Postby George Willer » Mon Mar 01, 2004 10:28 pm


It should be the same as a regular Cub, 5 1/2". I'm sure you will want to mount the gearbox so the offset is as far as possible to the right. You may have to add an elbow to the vent.
George Willer

The most affectionate creature in the world is a wet dog. Ambrose Bierce
User avatar
George Willer
Cub Pro
Cub Pro
Posts: 7011
Joined: Sun Feb 02, 2003 9:36 pm
Location: OHIO, Fremont
Zip Code: 43420
Circle of Safety Award
Circle of Safety: Y

Return to Farmall Cub

Who is online

Users browsing this forum: No registered users and 8 guests