I am going to order the two manuels from Binder books. I beleive the numbers I need for details for overhauling most every thing is TC-37 F parts manual & cub service manual. Am I correct or is there more ? Ineed to get into the final drive since it is leaking & needs brakes. Also needs maintaince on Gov. & such. I guess first "horse off " the wheel weights and then the wheel ?
Elmer.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Parts @ Service Manuals
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 67
- Joined: Tue Aug 19, 2003 9:54 am
- Location: Springfield MO
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Elmer, those two manuals should cover what you need. But, you might also consider getting the Owner's Manual as well. There is a lot of good service information in it. System capacities and maintainence schedules and other good stuff.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 67
- Joined: Tue Aug 19, 2003 9:54 am
- Location: Springfield MO
Parts @ Service Manuals
BIG DOG,
I have the operators manual, I should have mentioned that. I checked my I.H. Dealer & I believe they want $49.95 for one of them. Binder Books is like $29.95 for the same one. Thanks for the quick reply. Elmer.
I have the operators manual, I should have mentioned that. I checked my I.H. Dealer & I believe they want $49.95 for one of them. Binder Books is like $29.95 for the same one. Thanks for the quick reply. Elmer.
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Elmer, one other thing you can do is visit Rudi's site and look over the manuals he has posted there. You should be able to quickly tell if the service manual and the parts catalog contain all the information you need. I'm sure they will.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
Who is online
Users browsing this forum: No registered users and 39 guests