Splitting stands

Tue Mar 02, 2004 6:44 pm

Got this in a E-Mail. Trying to help him out. Who was building and selling these? I sent him all I could find in the archives pictures and all.

hi Jim.
I am located in chesterville, maine & have a 1947 cub. am looking for engine stands (fees 142-1) or some prints or drawings to fabricate same. would appreciate any info. you can give me. thanks

Tue Mar 02, 2004 8:44 pm

Bob Grootegoode was making them. Said he wasn't going to make any more after the last batch he made. Don't know if he sold them all or not. Might find him on the ATIS list.

Wed Mar 03, 2004 8:06 pm

Hi,

RE: Tractor Stands

Bob's e-mail address was at the time I got mine:
groot123@aol.com

Just a note: Being overly careful, I guess but I made a slight
modification. I set mine at the proper height on a concrete floor and then I drilled a 1/4 in. hole through the the outer and inner parts and inserted
a 1/4 in. pin. Sure hope Bob doesn't mind. :idea: :idea:

Wed Mar 03, 2004 10:39 pm

If Bob is not going to build anymore, it sure would be nice if he would donate a copy of the drawings for the Implements and Parts Sketches section. I hope somebody might mention that to him in passing.......

Fri Mar 05, 2004 6:26 pm

Hi Jim,

Just got an e-mail from Bob today and he indicated that he was not going
to make any more, however, he still has some few left.

Groot123@aol.com.

Fri Mar 05, 2004 9:57 pm

I was well pleased with the ones I got from him. They would make a good Easter present for your wife.

Robert
Alabamacub

Fri Mar 05, 2004 10:33 pm

Alabamacub wrote:They would make a good Easter present for your wife.
Alabamacub


I'd be careful of that! I am still walking with a cane after getting my wife a new parts washer and a snow shovel for Christmas in 2002.

Sat Mar 06, 2004 6:38 am

You never told us John, How does that parts washer work on dishes?

Sat Mar 06, 2004 11:20 am

I'm having trouble getting the cleaning solvent rinsed off good enough. It makes the food taste funny.