It is that time again, need your help. This is sort of Cub related. In otherwords, this particular implement will soon be mounted to the rear of Ellie-Mae in time for Spring Planting.
I purchased a moldboard plow - horse drawn and the type that is used to make the rows/hills in a truck garden. Didn't have a clue who made it as none of the part numbers or model number were identifyable.
Well, been playing with my newly constructed self designed sand-blaster (which works like all get out btw!
) and low and behold there is a part number and manufacturer's mark.
No, unfortunately my luck is not good enough to have bought an IH plow. But it is the next best thing I guess. It is a Massey-Harris. The part number is P 7591 and is on the leg or arm or whatever it is called that mounts to the draw plate and the moldboards mount to that. If I can find a drawing I will add it asap to help in identification.
I know that a bunch of you Cubbers, also collect Massey-Harris equipment and I am hoping that someone has a part manual or owner's manual that would show this part number and be able to identify the plow model. I know I am dreaming here, but gotta hope for the best.
I will also post on the M-H board, but wanted to start here first. I already called my CaseIH dealer who also deals in Massey Ferguson and Massey-Harris, but the part just comes up as No Longer Available - No Substitution, so there is a dead end, as it does not identify what this part belongs to
- some CD Roms just aren't as good as the CaseIH ones.....
Any ideas? All help is appreciated. TIA