Farmall Cub Forum -- Questions and answers to all of your Cub related issues.
Moderator: Team Cub
5 posts • Page 1 of 1
Greetings all, I am a recent purchaser of a '48 Cub and know pretty much nothing about it. Seems to be in very good shape as it starts right up and purrs like a kitten.
There is some slight noise from the drive gears while not under a load (I've only used it to drag some utility poles around). I am not even sure how to check the transmission fluid, but am assuming the fill plug is what's located directly behind the gear shift ??? I am suspecting it may be low, hence the noise?
I'll have numerous more "rookie" questions and appreciate your patience with my lack of knowledge. I definitely can relate to being able to enjoy seat time with my first ever tractor. Dennis H.
Dennis. Welcome to the board. This is the place to learn about cubs. No question is dumb so don't be afraid to ask. The people here are very knowledgable and more than willing to help. Read the announcement at the top of the forum for "New Members". Again ... welcome.
Dennis, welcome aboard. I suggest the first thing to do is to order an owners manual, which you can get from your local Case/Ih dealer, or on line from http://www.binderbooks.com If you do your own mechanicla work also get the parts and repair manuals. In the mean time you can go to Rudi's web site to see manuals.
Yes the fill plug is behind the gearshift. The level plug is on the left side down low (only holds about 3 pints). A little whine is normal, the transmission gears are square cut.
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
Appreciate the welcomes and info. I can see that this tractor stuff will be easily addictive. The wife likes it better than some of my other hobbies, so far.
My Cub is also not equipped with a generator, although the gentleman I bought it from gave me a couple. One appears original and the other a rebuilt. Both look pretty rough and don't know if either is good. Right now the 6 volt battery must be charged which has lasted for numerous starts but will eventually run down and need charged again. I'd like to get the lights hooked up also. Should I get the generator checked and replace or install an alternator which has been suggested by some non-Cub owning friends?
Again, to echo Ron and John, welcome to the board and to the Cub Family. I am sure that you are going to be very happy with your 48. I have a 48 and a 51 - the 48 is Elie-Mae and she runs like a top (after some serious TLC) and Jethro is the 51 who is in dire need of a rebuild
First take your generator to a good shop and have them bench test it and repair it if need be. You will be glad you did.
Second, install your generator. There is no need to convert to 12 volts as must be done if you install an alternator. There are many views on this, but I look at it this way, it was designed as a 6 volt system - positive ground, has worked for nigh on to 60 years, don't monkey with it
Ellie is still a 6 Volt system and she works beautifully.
Third, visit the Manual Server and read up on the stuff available on the server and through the links, especially the Cub Info, Cub FAQ's, the Best of H.L. Chauvin and then the Owner's Manual.
Fourth, as John has already said, go to Binder Books and get these three manuals:
TC-37F Parts Manual
GSS-1411 Service Manual
These were the first things I bought when I bought my tractors and they have been invaluable.
Also, check out the Blue Ribbon Service Manuals - the Generator is extremely well covered and should help you put it back together. Also, the whole electrical system is covered and is a very good guide for putting it all back together as well.
Fifth - and this is the important one - ENJOY YOUR CUB!!!! She will give you tons of fun and enjoyment over the years.
Again welcome to the world of Cubs
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
"Before beginning a hunt, it is wise to ask someone what you are looking for before you begin looking for it." - Winnie
Cub Manual Server
5 posts • Page 1 of 1
Who is online
Users browsing this forum: danovercash and 3 guests