This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Bearing Help Please!!

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Donny M
10+ Years
10+ Years

Bearing Help Please!!

Postby Donny M » Fri Mar 12, 2004 1:37 pm

Anyone have a cross number for the rear transmission spline bearing.
I have the 3 piece type consisting of 351535R1, 352402R91, and 351536R1. The newer part number is 357931R91. Don't know if these are interchangable or not.

Thanks,
Donny

SPONSOR AD

Sponsor



Sponsor
 

User avatar
Rudi
Cub Pro
Cub Pro
Posts: 28706
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada
Contact:

Postby Rudi » Fri Mar 12, 2004 1:56 pm

Donny:

According to the information I have - 357931R91 is actually this:

Bearing, transmission spline shaft rear needle, cub tractors w/werial no 180614 and above and all cub lo-boy tractors.

Whereas

351535R1 is Shield, transmission spline shaft rear bearing used with transmission case 351530R1 thru 351530R5, cub tractors w/serial no. 180613 and below

352402R91 is Bearing, transmission spline shaft rear roller, used with transmission case 351530R1 thru 351530R5, cub tractors w/serial no. 180613 and below

351536R1 is Shield, transmission spline shaft front bearing, used with transmission case 351530R1 thru 351530R5, cub tractors w/serial no. 180613 and below


So, from my limited experience with this catalog program, I would say no, it is not interchangeable
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


User avatar
George Willer
Cub Pro
Cub Pro
Posts: 7013
Joined: Sun Feb 02, 2003 9:36 pm
Zip Code: 43420
Circle of Safety: Y
Location: OHIO, Fremont
Contact:

Postby George Willer » Fri Mar 12, 2004 3:01 pm

Donny,

The bearings I have seen are needles running directly on the shaft. Not a good idea... especially when the shaft wears a little. Lubrication is an iffy thing. A little field engineering to reduce the shaft a little makes it possible to use a real bearing.

A ND 3L04 or a SKF 6004 has the same OD and an ID just a few thou smaller. I'm thinking a sealed bearing with permanent lube would be a good idea.

According to my notes, the shaft needs to be reduced to .787"... just enough to clean it up.
George Willer
http://gwill.net

The most affectionate creature in the world is a wet dog. Ambrose Bierce


Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 55 guests