Wear on governer gear and ignition oil seal

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Wear on governer gear and ignition oil seal

Postby Steve Ruddy » Fri Mar 12, 2004 7:49 pm

Ok Let me try again
Steve Ruddy
Guerneville CA
User avatar
Steve Ruddy
Cub Star
Cub Star
 
Posts: 174
Joined: Sat Feb 28, 2004 2:16 pm
Location: Guerneville CA

Postby Steve Ruddy » Fri Mar 12, 2004 7:52 pm

Here are some photos of the wear that's showing. I'm not sure what caused it. Any advice?
Image

Image
Last edited by Steve Ruddy on Fri Mar 12, 2004 7:57 pm, edited 1 time in total.
Steve Ruddy
Guerneville CA
User avatar
Steve Ruddy
Cub Star
Cub Star
 
Posts: 174
Joined: Sat Feb 28, 2004 2:16 pm
Location: Guerneville CA

Postby John *.?-!.* cub owner » Fri Mar 12, 2004 7:52 pm

Steve, can't see your pix
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19105
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.

Postby Steve Ruddy » Fri Mar 12, 2004 7:53 pm

Wow that was fast! Bear with me John I'll try again.
Steve Ruddy
Guerneville CA
User avatar
Steve Ruddy
Cub Star
Cub Star
 
Posts: 174
Joined: Sat Feb 28, 2004 2:16 pm
Location: Guerneville CA

Postby Steve Ruddy » Fri Mar 12, 2004 7:55 pm

Hows That?
Steve Ruddy
Guerneville CA
User avatar
Steve Ruddy
Cub Star
Cub Star
 
Posts: 174
Joined: Sat Feb 28, 2004 2:16 pm
Location: Guerneville CA

Governor and oil seal

Postby Bill V in Md » Fri Mar 12, 2004 8:26 pm

Steve,

I can see the wear area on the oil seal. Does the governor shaft also have some rough areas? If yes, the root cause of this must be identified and corrected. Not sure what would cause this - excessive vibration maybe? It is always a good idea to put a thin coating of oil on a new seal. Light action with an emory cloth could help take out minor rough spots on the shaft.,,,,,Bill V.
Bill VanHooser
1948 Cub w/ snowplow
User avatar
Bill V in Md
501 Club
501 Club
 
Posts: 540
Joined: Sun Feb 02, 2003 6:51 pm
Location: MD, Catonsville
Zip Code: 21228
Circle of Safety Award
Circle of Safety: Y

Postby Jim Hudson » Fri Mar 12, 2004 8:33 pm

Position seal 23/32 from ignition mounting flange and square.
Look at this link down toward the last page.
http://www.cleancomputes.com/Cub/Blue%2 ... Engine.htm
Young man for work, old man for advice
User avatar
Jim Hudson
501 Club
501 Club
 
Posts: 1223
Joined: Sun Feb 02, 2003 1:11 pm
Location: Albemarle, North Carolina 28001
Zip Code: 28001

Postby John *.?-!.* cub owner » Fri Mar 12, 2004 9:33 pm

The seal was seated to deep in the mouning flange, clean up any rough spots on the shaft, andfollow Jim's advice
"The Constitution is not an instrument for the government
to restrain the people, it is an instrument for the people to restrain the
government lest it come to dominate our lives and interests." Patrick Henry
User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
 
Posts: 19105
Joined: Sun Feb 02, 2003 2:09 pm
Location: Mo, Potosi
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.

oil seal

Postby tobaccofarmer » Fri Mar 12, 2004 10:35 pm

Looks like this is the answer to why there is oil coming out of me speedo hole. how easy is it to get that seal out? I have a shop manual and it shows it fairly good, but im not sure about when it talks about marking the teeth with chalk? are there not already marks on the gears?
tobaccofarmer
 
Posts: 21
Joined: Tue Feb 24, 2004 8:55 pm
Location: Denton Texas

Postby Donny M » Sat Mar 13, 2004 12:25 am

tabaccofarmer,
There are punch marks on each gear which are very hard to see especially when putting the governor back in. Chalk marks are much easier to see. Make sure #1 cyclinder is TDC then mark the 2 gears.

It may be best to read H.L. Chauvin's how to at this link: http://farmallcub.com/HLChauvin.htm
Donny M
 

Gov wear

Postby Chris Todd » Sun Mar 14, 2004 9:09 am

Steve,
I had the same wear on my gov when I pulled it apart. I ordered a bushing set from IH(don't have number ) and rebushed shaft which I assumed might have helped cause wear. Then a speedi sleeve from NAPA(no number either) and finished it off nicely. Only thing on the sleeve they didn't have one that was short enough and covered the teeth area. Had machine shop put newly sleeved shaft on a lathe and they shortened to proper height. Hope this helps you.
Chris
User avatar
Chris Todd
501 Club
501 Club
 
Posts: 713
Joined: Sun Feb 02, 2003 8:15 pm
Location: OH, Zanesville
Zip Code: 43701
Tractors Owned: 1955 Farmall Cub
1947 Farmall Circle Cub
1973 Int. 474

Postby Dan Robertson » Sun Mar 14, 2004 10:37 am

When looking at Steve's pic. of the seal showing where it had apparently been rubbing the gear teeth it also appears that this seal had been installed backwards. :? As we learned in an earlier post in the last week the side of the seal with the friction spring visible around the perimeter of the rubber should go toward the oil supply/reservoir, or the governor in this case. :wink:
:) Dan Robertson :)

:oops: We all make mistakes :oops:
I try to keep mine to a minimum
User avatar
Dan Robertson
Cub Star!!
Cub Star!!
 
Posts: 311
Joined: Thu Feb 06, 2003 4:08 pm
Location: Bedford, IN
Zip Code: 47421
eBay ID: gotowin
Tractors Owned: 55 cub,
74 cub,
Cub Cadet 1515,
Case 580B TLB,
53 Ford Jubilee,
MF 271XE,
JD 3130,
JD gater

Postby Steve Ruddy » Sun Mar 14, 2004 12:12 pm

Then a speedi sleeve from NAPA(no number either) and finished it off nicely


What is a speedy sleeve? Also how do you disassemble the governor?

it also appears that this seal had been installed backwards.


No it was installed as you descibed.
Steve Ruddy
Guerneville CA
User avatar
Steve Ruddy
Cub Star
Cub Star
 
Posts: 174
Joined: Sat Feb 28, 2004 2:16 pm
Location: Guerneville CA

Postby Donny M » Sun Mar 14, 2004 12:45 pm

Steve,
Just to clairfy, which side has the interference? The governor side or the mag side?
Donny M
 

Postby Jim Hudson » Sun Mar 14, 2004 1:17 pm

Search this site for speedie sleeve info
http://www2.chicago-rawhide.com/faq/1.4.html
Page 7&8 of this site is a little governer info.
http://www.cleancomputes.com/Cub/I&T%20IH-50%20Shop%20Manuals/IH-50%20Complete/index.html
Young man for work, old man for advice
User avatar
Jim Hudson
501 Club
501 Club
 
Posts: 1223
Joined: Sun Feb 02, 2003 1:11 pm
Location: Albemarle, North Carolina 28001
Zip Code: 28001

Next

Return to Farmall Cub

Who is online

Users browsing this forum: Eugene, Hoyt-Clagwell, twotone and 6 guests