Fri Mar 12, 2004 9:15 pm
Love the smell of grease. On my quest to rebuild my hydraulics and replace the front imput seal and gasket on the trans, I got to it today.
Parts all came in so back to the house and started to it. Pulled off the mower deck, All the stuff to get the tank/hood off and after dealing with some less than nice bolts, like the two holding the seat post on, I got it split and sitting pretty. Tomorrow will ge the seals and gaskets in and two halves back together.
Then comes the hyd part which has me holding my breath a little. I will be talking a scad of pics as it comes apart, so if anyone would like a copy of the pic disc, just let my know. I'm no good a posting pics and will be quite a few so I can't put them directly here.
And by the way, a lot in info leading up to this came from you guys, so a big thanks. And I'll keep you all posted on my progress.
Fri Mar 12, 2004 9:46 pm
I would love a copy of your photo disk when you get it done!
Sat Mar 13, 2004 6:22 am
Dan: I would like a copy too. Thanks, Dan England
Sun Mar 14, 2004 8:12 am
For a copy of the pictures of the hyd rebuild, send me your full name and mailing address and I'll send these out as soon as it's done. A week or two at the most. My email address is firstname.lastname@example.org