Got her split tonight.
Posted: Fri Mar 12, 2004 9:15 pm
Love the smell of grease. On my quest to rebuild my hydraulics and replace the front imput seal and gasket on the trans, I got to it today.
Parts all came in so back to the house and started to it. Pulled off the mower deck, All the stuff to get the tank/hood off and after dealing with some less than nice bolts, like the two holding the seat post on, I got it split and sitting pretty. Tomorrow will ge the seals and gaskets in and two halves back together.
Then comes the hyd part which has me holding my breath a little. I will be talking a scad of pics as it comes apart, so if anyone would like a copy of the pic disc, just let my know. I'm no good a posting pics and will be quite a few so I can't put them directly here.
And by the way, a lot in info leading up to this came from you guys, so a big thanks. And I'll keep you all posted on my progress.
Dan Stuckey
Altoona, Pa
Parts all came in so back to the house and started to it. Pulled off the mower deck, All the stuff to get the tank/hood off and after dealing with some less than nice bolts, like the two holding the seat post on, I got it split and sitting pretty. Tomorrow will ge the seals and gaskets in and two halves back together.
Then comes the hyd part which has me holding my breath a little. I will be talking a scad of pics as it comes apart, so if anyone would like a copy of the pic disc, just let my know. I'm no good a posting pics and will be quite a few so I can't put them directly here.
And by the way, a lot in info leading up to this came from you guys, so a big thanks. And I'll keep you all posted on my progress.
Dan Stuckey
Altoona, Pa