Tue Mar 16, 2004 9:42 am
Well With some help from a fine fella over on ytmag site I have made a detailed drawing of the cub/140/super-A hyd by-pass block.
I am going to attempt to make this in the shop after work. I hope all works out well. Problem is I wont be able to test it for a while till I get the money to spend on a remote cylinder and a control valve system.
My plans are to buy a double spool control valve so that I can replace my fast hitch control rod with a hyd cylinder for lift and then have a remote cylinder so I have power angle on my 1-point back blade. I am assuming this will leave me full contol of the front cub hyd system? If so this would let me leave the front grader blade on as well. Does this sound feisable to you guys? I have started to lay the ground work to what I need to buy and fittings and such. Wish I could test out this by-pass block first before I go buy all my parts. Is there anyone already set up to use a by-pass block? Maybe I could ship you mine and you could see if it works or if I need to adjust anything?
if anyone has done anything close to what I plan on doing please give me any advice you may have.
oh does anyone have any spare hyd parts for sale for a good price cylinders double acting and valves?
Wed Mar 17, 2004 8:28 pm
Also interested in either buying a flow block or fabricating one like yourself. Could you please post a picture/ drawing on the forum, or may be send one to my e-mail? I was thinking of running a log splitter off the newly rebuilt hydraulics and need a flow block like this to accomplish the task. Are there any places that sell these blocks?
Please let me know Chad
Wed Mar 17, 2004 9:12 pm
Check with WKPoor on this board. I think he may be able to help. Send him a PM or an email.
How's that Bill
Last edited by Donny M on Thu Mar 18, 2004 12:16 pm, edited 1 time in total.
Wed Mar 17, 2004 10:48 pm
I got a new IH block for $50 from http://www.hoober.com/home/home.htm
They have always came up with my parts. Seems they can check all other dealers. They respond very fast. Here is the number of the block. http://www.tm-tractor.com/gim/bypass_block_001.htm
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.