Oil Gauge for 48 Cub

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Oil Gauge for 48 Cub

Postby Steve Ruddy » Sun Mar 21, 2004 12:10 pm

Is the top oil gauge an orignal style for the 48 Cub? If so where can I get one? The one on the bottom is what Carter and Gruenewald sent me.



Steve Ruddy
Guerneville CA
User avatar
Steve Ruddy
10+ Years
10+ Years
Posts: 174
Joined: Sat Feb 28, 2004 2:16 pm
Location: Guerneville CA

Postby Dan Robertson » Sun Mar 21, 2004 12:26 pm

The bottom one I believe is correct for the 48 model, although the one on my 1955 cub reads in lbs. up to 40 lbs. with no red and white color on the face. The top gauge is not an IH gauge, I believe that is a Stewart Warner gauge.
:) Dan Robertson :)

:oops: We all make mistakes :oops:
I try to keep mine to a minimum
User avatar
Dan Robertson
10+ Years
10+ Years
Posts: 311
Joined: Thu Feb 06, 2003 4:08 pm
Location: Bedford, IN
Zip Code: 47421
eBay ID: gotowin
Tractors Owned: 55 cub,
74 cub,
Cub Cadet 1515,
Case 580B TLB,
53 Ford Jubilee,
MF 271XE,
JD 3130,
JD gater

Postby Jim Becker » Sun Mar 21, 2004 12:40 pm

The lower one is probably as close as you will find today. It has a clamp attached to the back side. The original would not have had the studs for holding the clamp. The studs can be cut off leaving a little nub from each stud.
User avatar
Jim Becker
Team Cub
Team Cub
Posts: 11976
Joined: Sun Feb 02, 2003 3:14 pm
Location: MN
Zip Code: 55319
Circle of Safety Award
Circle of Safety: Y

Return to Farmall Cub

Who is online

Users browsing this forum: crazyjoe, FCUBMAN, Rudi and 3 guests