This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Touch control question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 145
- Joined: Mon Feb 02, 2004 7:05 pm
- Location: Brookfield Nova Scotia
Touch control question
I had my touch control out and took it all apart and cleaned it well. Put a new rebuild kit and large screen into it. Put 4 pints into it pumped it quickly 10 or 12 times to purge air out of it. and nothing. Ther is lots of presure when I take out one of the little allen screws where the steel lines go onto the touch control. Any ideas what the problem could be?
My dad once told me if it wasn't for bad luck......I wouldn't have any luck at all......
Who is online
Users browsing this forum: No registered users and 40 guests