This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Front wheel spindle seal, I meesed up big time

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
John Niekamp
10+ Years
10+ Years
Posts: 757
Joined: Tue Apr 06, 2004 9:41 pm
Zip Code: 62301
eBay ID: jniekamp66
Location: Quincy, IL

Front wheel spindle seal, I meesed up big time

Postby John Niekamp » Tue Apr 27, 2004 8:51 pm

Tearing apart my front wheel spindle, I was not paying enough attention and messed up the sleeve that the seal rides in.

The sealing surface is a small piece of tubing (aprox .050") with about a 3/16" lip that bottoms out on the back side of the hub and presses into the hub.

The seal is a orignial leather part no. 35076R91 and this site shows three other replacement type seals. What it don't tell me is what this little sleeve is called and how to obtain one.

I doubt if this seal comes with the sleeve too.

My thoughts are to order a new seal and then machine me a new sleeve.

Second thought is since the seal is pressed on the spindle and it is sealing on this sleeve, why could I not make it more modern and have the seal pressed in the hub and then let it do it's sealing on the 1.5" area of the spindle.

Am I making any sense here?, now that I am confussed!!!!!



Any thoughts here?

John N
Last edited by John Niekamp on Tue Apr 27, 2004 9:03 pm, edited 1 time in total.

SPONSOR AD

Sponsor



Sponsor
 

User avatar
Rudi
Cub Pro
Cub Pro
Posts: 28706
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada
Contact:

Postby Rudi » Tue Apr 27, 2004 9:01 pm

John:

Maybe this will help. From the manual server - TC-37F Revision 3 - Group 14 - Suspension

Image

Image
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


User avatar
George Willer
Cub Pro
Cub Pro
Posts: 7013
Joined: Sun Feb 02, 2003 9:36 pm
Zip Code: 43420
Circle of Safety: Y
Location: OHIO, Fremont
Contact:

Postby George Willer » Tue Apr 27, 2004 10:14 pm

John,

When I built the tricycle Cub, I wasn't happy with the original style seal. I eliminated the insert from the hubs and made a new carrier to hold a big O-ring. The O-ring seals against the machined inner surface of the hub. I think the same thing can be done on the original spindles and would be an improvement.

Image

Here are all the parts that were made for the new front end including the alternate seal system, but before the spindles were welded in place.

Image

If I understand it right, the parts you need to keep it original are the ones I eliminated. I may still have them... but finding them may be another matter.
George Willer
http://gwill.net

The most affectionate creature in the world is a wet dog. Ambrose Bierce


Return to “Farmall Cub”

Who is online

Users browsing this forum: Majestic-12 [Bot] and 27 guests