Question on a Cub Cub Cultivator

Sat May 01, 2004 6:58 pm

Hi All

I bought what I thought was a Cub Cultivator from a guy (it is in pieces) and I need to assemble it. I was checking Rudi's manuals, and to be honest, am now not sure what model I bought.

It has three large "triangular" tines, and two smaller trinagular tines, and then one "straight" tine that I assume goes in the middle.

Anyway know which model it is, and could send me a few assembled pictures? I would appreciate it, because it seems like I only have a heep of parts right now.



Sat May 01, 2004 7:02 pm


You may well have the 144. The 144 came with a number of optional setups. You could get the spring teeth, the spring feet and a few others.

Check the owners manuals again, and you may also want to check the CBI-1A which has a section on the 144 and is quite detailed.

Thanks Rudi

Sat May 01, 2004 7:10 pm

Yes. The 144 definitely looks a lot like it. It has the two rear gand beams and the tines that attach to these beams. I guess the smaller tines are for the front. Do you know of any links to good photos of these installed, especially the front?


Sat May 01, 2004 10:37 pm

Here is a photo of my 65 with cultivators attached.


Sun May 02, 2004 8:56 am


Tried to respond last night but couldn't, lost my connection again.

The answer to that is no not really. The manual is pretty good, BUT you really have to pay attention to the details. Look at everything 2 and 3 times. I had to do that at least to get it set up right.

I have to put the cultivators on next week to make the horse hoe, so I will take pics as I mount it up.

Hope that will help

Sun May 02, 2004 11:53 am

Tom has some good pictures on the TM Tractors site.

Sun May 02, 2004 7:27 pm

Jim -- thanks. Those pictures on Tom's site are very helpful. Thanks again. David

Mon May 03, 2004 8:08 am

Rudi ---- I downloaded the 144 manual off your site this morning and printed it out. I was really please with the new formatting --- ie the whole manual in one html file, rather than a series of JPG's. It makes the download and print out a whole lot easier than individual files (especially when you have a broad band connection!). But I am sure if one is on dial-up, it would be a painful exercise. Thanks. David

Mon May 03, 2004 8:44 am

Glad you like it. Hopefully as soon as is humanly possible with all the other stuff to do, I can have most of the server converted over soon.

Remember, when you go to put the cultivator together to look at the manual a lot. It is the only way that it makes sense. It is very easy to put parts on backwards.

Don't ask :oops: :!:

Mon May 03, 2004 1:00 pm

Don't ask

Aw, come on Rudi.... spill it :lol: