This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

TOB

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Greg
10+ Years
10+ Years
Posts: 62
Joined: Tue Feb 04, 2003 2:02 pm
Location: Central Texas

TOB

Postby Greg » Thu May 13, 2004 8:55 am

I finally found time to replace my TOB, I went ahead and put another new style bearing in. I'll report on the results as soon as I fire up the tractor. My question is: Can I run the tractor w/o connecting the hydraulic lines? It would sure simplify things if I have to split it again not to have to drain the hydraulic fluid. Will I damage the hydraulic pump by running it a 5-10min w/o the lines/fluid in place? Thanks as always.
Top
Jim Becker
Team Cub
Team Cub
Posts: 17279
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Postby Jim Becker » Thu May 13, 2004 10:43 am

Yes, you can damage the pump that way. If you need to run the engine without hooking up the hydraulic lines, remove the pump. It is only 2 bolts. Very little oil will be thrown out the pump opening. If you are going to run the tractor any amount without the pump, cut a temporary pump opening cover out of cardboard.
Top
Greg
10+ Years
10+ Years
Posts: 62
Joined: Tue Feb 04, 2003 2:02 pm
Location: Central Texas

Postby Greg » Fri May 14, 2004 6:55 am

Thanks Jim.
Top

Return to “Farmall Cub”

Who is online

Users browsing this forum: Dave Downs, Greg_B, Majestic-12 [Bot] and 7 guests