Fri May 21, 2004 12:07 am
Hey fellas I picked up a 184 this week, and the PTO drive belts (twin belts from the flywheel to the PTO shaft) are the wrong size. They completely bypass the tensioner pulley. I don't have a set of manuals yet, but I was hoping someone could tell me what size belts I need.
I hope this is not too far off topic-any help will be greatly appreciated.
Fri May 21, 2004 7:54 am
I don't have a book on the 184. But if it is the same as the 154 and 185, it takes 527382R91. This is a matched set and I would suggest you get them from aCaseIH dealer. As belts go, they won't be cheap.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.