Wed May 26, 2004 8:28 am
Most Helpful Gurus of Cub-dom
I am ready to re-wire my cub and I recall in my travels a chart or diagram lisiting the proper gauges and colors for the wires (wire gauge being more important to me, at this point) I have an operator's manual and service manual, but I don't see this info in there. Has anyone come across this listing for the proper wire guages anywhere, I just can't remember where I saw it! and Im only 30, god help me!
Wed May 26, 2004 9:10 am
I would run #10 wire for the charging circuit (generator to ammeter to battery cable). #14 wire will handle everything else.
Wed May 26, 2004 9:50 am
Maybe this link will help.
You can buy wiring harnesses from Carter and Gruenwald. If you choose to make your own, follow Big Dog's advise. I don't know if there are "correct colors" or not. The wire colors in the harnesses made now don't match the colors in original harnesses. The wires are different colors just help keep them straight. This might be a good topic for Wireharness to discuss with you. He knows someone who makes wiring harnesses. Check the memberlist or archives and send him a PM.
Wed May 26, 2004 10:24 am
Check the server under Specialty Services. The Wireharness addy is there. Oh, got an email from a guy who obtained one of his harnesses -- as he said - "Spot ON!" Perfect fit and everything was as per the original.
Oh, I have not gotten one, so I am just forwading on a comment.
Wed May 26, 2004 11:23 am
Thanks All! easier than I thought.
Wed May 26, 2004 1:40 pm
The colors on the ATIS wire diagram are not the original colors. Those colors are the ones that showed up best when I drew up wire diagram from info I got from Jim Becker.
If you get the correct colors I can update the drawings or any other changes.
Thu May 27, 2004 7:20 am
Cubs use 8 different wire harness's besure you have the right one!
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.