Thu May 27, 2004 7:29 pm
Leave the front snow blade on and then mount the Woods 59 mower. Maybe I can't because of the hyd. lift? ( one goes up, one goes down)
Thu May 27, 2004 7:57 pm
I'm pretty sure the brackets for the blade will interfere with the mower. I'd want the weight off of the front of the tractor anyway.
Thu May 27, 2004 8:02 pm
Will the mower clear the arm that comes back to the torque tube from the blade.
The blade attaches to the frame with 3 pins. Remove them and tie up the bottom spring arm. That shoud give you enough clearnace and make steering easier by removing weight.
It's been several years since I used a 59 inch Woods, but I'm pretty sure that on it the deck came up when you pushed the lift forward, and pushing forward also raises the front blade.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.