Cubfest Norteast- We had a blast!!
Posted: Sun Jun 13, 2004 6:38 pm
What a weekend!! I now have a few minutes to sit down and share some pictures of the goings on this weekend. We got all of our tractors out and lined up along the road to greet our Cub friends as they came in the road.
(The only bad thing about that is now our wives know how many tractors we really have! )
Board regular Lurker Carl gave us a very informative carburater rebuild workshop.
From left to right in the picture, Rudi, Lurker Carl, Artc, and Bruce Sanford.
Then we headed to field to make some noise, we held a small plowing competition, and most folks took there turn at the wheel. This was the first time Artc had ever turn a sod!
When the plowing was over we headed to the garden for a hilling contest, and again, most had a chance to make some dust again.
We left from the hilling competition for our tractor drive to supper about 3/4 of a mile up the road, and after supper enjoyed some music from "The Happy-Go-Lucky Fiddlers".
This morning, Jos Van Oostrum, an IH dealer and enthusiast from Nova Scotia, gave us a governor rebuild workshop.
Then it was time to say good-bye to new friends and old til next time.
Thank you to all that helped out, with special thanks to Arbing Equipment and Babineau Equipment, IH dealers from nearby, for helping to sponsor our show, and to Carl and Jos, for some very informative workshops!!
Carl took more pictures, and the workshops are destined to become "PowerPoint" presentations for Rudi's manual server.
WE had a great time, and hope to see even more Cubbers next year!!!
(A few edit, but now I FINALLY got all thepictures to show! )
(The only bad thing about that is now our wives know how many tractors we really have! )
Board regular Lurker Carl gave us a very informative carburater rebuild workshop.
From left to right in the picture, Rudi, Lurker Carl, Artc, and Bruce Sanford.
Then we headed to field to make some noise, we held a small plowing competition, and most folks took there turn at the wheel. This was the first time Artc had ever turn a sod!
When the plowing was over we headed to the garden for a hilling contest, and again, most had a chance to make some dust again.
We left from the hilling competition for our tractor drive to supper about 3/4 of a mile up the road, and after supper enjoyed some music from "The Happy-Go-Lucky Fiddlers".
This morning, Jos Van Oostrum, an IH dealer and enthusiast from Nova Scotia, gave us a governor rebuild workshop.
Then it was time to say good-bye to new friends and old til next time.
Thank you to all that helped out, with special thanks to Arbing Equipment and Babineau Equipment, IH dealers from nearby, for helping to sponsor our show, and to Carl and Jos, for some very informative workshops!!
Carl took more pictures, and the workshops are destined to become "PowerPoint" presentations for Rudi's manual server.
WE had a great time, and hope to see even more Cubbers next year!!!
(A few edit, but now I FINALLY got all thepictures to show! )