wheel moves sideways

Mon Jun 14, 2004 5:37 pm

Alright guy's help me out, I am new at this tractor work and the 65 cub started to make squeeking noises in the final drive. I can take the rear wheel by my hands on each side and move it side ways and it makes a loud squeeking noise. Is this something that I can fix or is this a pro's job. amd what might it be? Any and all help please.

rosco

Mon Jun 14, 2004 5:54 pm

This may sound like a stupid answer but Have you checked to see if the lug-nuts came loose?. :roll:

Mon Jun 14, 2004 6:03 pm

I got all in a panic thinking I was going to have to put bearings in the final drive of our A. Got it all jacked up, ready to start dismantleing, and luckily found that it was just the bolts that hold the rim to the wheel center!! :oops: You may be that lucky too! :wink:

tight

Mon Jun 14, 2004 6:52 pm

Sorry guy's but the wheel is tight.

Tue Jun 15, 2004 9:42 pm

OK, that's likely axle bearings. You should be able to tackle that yourself. Take a look at the service manual on Rudi's site. It should give a pretty good outline of the job. :wink:

Wed Jun 16, 2004 12:45 am

rosco,

Partsman is right get a Service and parts manual they will make the job much easier. :) :)