This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

ledger plates for sickle bar mower

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Dave F.
10+ Years
10+ Years
Posts: 518
Joined: Fri Feb 07, 2003 12:36 pm
Location: WV, Morgantown

ledger plates for sickle bar mower

Postby Dave F. » Sat Mar 07, 2009 11:47 pm

Where can I get ledger plates for the rock guards for a cub 22 mower, & what would the average cost be ? are they sold seperately or buy the box? I need quite a few. Thanks Dave F.

SPONSOR AD

Sponsor



Sponsor
 

JGtools
10+ Years
10+ Years
Posts: 957
Joined: Tue Dec 18, 2007 8:18 pm
Zip Code: 55325
Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy
Location: Dassel, Minnesota

Re: ledger plates for sickle bar mower

Postby JGtools » Sun Mar 08, 2009 5:52 am

Dave, i bought mine from a local farm fleet store, about 3.00 each. you can also buy the rock guard for about 9.00 each.

User avatar
Bus Driver
10+ Years
10+ Years
Posts: 2917
Joined: Sat Feb 11, 2006 5:26 pm
Location: NC

Re: ledger plates for sickle bar mower

Postby Bus Driver » Sun Mar 08, 2009 7:27 am

Of all the ledger plates that I have bought, only those from Case/IH properly fit the original rock guards. Even a couple of years ago, the price was well over $3.00 each for the "good" ones.
Last edited by Bus Driver on Sun Mar 08, 2009 9:08 am, edited 1 time in total.
Luck favors those who are prepared

JGtools
10+ Years
10+ Years
Posts: 957
Joined: Tue Dec 18, 2007 8:18 pm
Zip Code: 55325
Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy
Location: Dassel, Minnesota

Re: ledger plates for sickle bar mower

Postby JGtools » Sun Mar 08, 2009 8:44 am

Busdriver is right. I just went out to my shop and checked the fit of new generic ledgers and they will not work for my original rockguards. They must be made to fit generic replacement rock guards. I will go to IH dealer. The ones i have mounted onsickle bar as of now are ok, but i have 2 extra original rockguards that will need new ledgers installed. looks like you get what you pay for at fleet farm store, The guy at the fleet farm said they would work for my rockguards, looks like he knows about as much as i Do... Jim


Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 29 guests