Drawbar Hole Size
Posted: Wed Jun 30, 2004 8:15 am
I don't have my drawbar handy to measure for myself, so can anyone tell me the diameter of the long row of holes at the rear of the drawbar. TIA.
Farmall Cub
The "International" House of Cubs (est. 5/10/1999)
https://www.farmallcub.com/phpBB2/
Drawbar Hole Size
Page 1 of 1
Posted: Wed Jun 30, 2004 12:43 pm
Mine are 11/16". Had to drill one out 3/4" for my hitch ball.....
Posted: Wed Jun 30, 2004 6:24 pm
Hi All
I think they were 5/8th inch original, after I drilled one of mine out to 3/4 someone posted you can special order 5/8 shank ones from auto parts stores. I don't know what stores or location. Just something I read her about a month ago after I opened up my center one to 3/4 Paul K. in N.h.
I think they were 5/8th inch original, after I drilled one of mine out to 3/4 someone posted you can special order 5/8 shank ones from auto parts stores. I don't know what stores or location. Just something I read her about a month ago after I opened up my center one to 3/4 Paul K. in N.h.
Posted: Wed Jun 30, 2004 7:33 pm
Most any auto parts worth their salt can get you a trailer ball
with 5/8 shank. Auto zone is the worst parts store I know of and even they can get them.
with 5/8 shank. Auto zone is the worst parts store I know of and even they can get them.