I finally got the sickle bar right after breaking the pitman arm (old and dry) then breaking the adjustment bolt for the belt. PO had broke it and put a coupling of sorts on the bolt to make it long enough, problem was, it wouldn't adjust up. No matter, it fell off the other day.
I cut it off the adjustment plate with a wheel.
Here's what he had on there.
I welded a piece of 1/2" all thread to it.
Picture is bad but the weld is not much better, it'll hold though.
I got a good two hours of cutting in, sure is fun but I couldn't imagine doin' it all day.....
Needed a good cigar and I'm ready to go.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Sickle bar
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Scott C
- 10+ Years
- Posts: 178
- Joined: Mon Mar 03, 2003 7:46 pm
- Location: Charleston, WV
- Contact:
Who is online
Users browsing this forum: No registered users and 35 guests