rear rims -- new style?
Posted: Wed Jul 07, 2004 2:20 pm
the 49 cub i bought this spring needed a new rear rim, so i bought one from wengers. finally got around to having the new tire mounted on the rim -- when i went to put the rim on the tractor a couple of nights ago, found out that the new rim was a different style...the old rims that are on have the channel where the square head bolt fits down in with no wrench required on the head -- its about a 2 inch bolt -- also has a wedge mounted under the channel which pinches tight against the wheel --- on the new rim, the channel is too narrow for the bolt, so the head must ride on top -- takes a 3 inch bolt to mount on wheel, and there is no wedge on the rim to tighten in against the wheel......i kinda figured that the old rim was the original style, and that the wengers rim was some sort of aftermarket........but yet earlier this spring i ordered new bolts from a farmall parts dealer and he sent me the longer bolts which fit the new rim, which i discovered when i went to put the rim on ....so which way is up?? will the new rim stay tight without the wedge?? which is original...or do i have a wrong new rim?? thanks alan